F:X Pro Reverse GND8 square wave filter
The Rollei F:X Pro Reverse GND 8 (3 stops/0.9) is ours vice versa Graduated gray filter. GND stands for Graduated Neutral Density, which means a filter with a transition from tint to transparency. These filters are partially coated in neutral gray, which can compensate for differences in brightness in the image. Normally, the coating on GND filters would run out to one side. However, reverse means that the course of the tint (coating) is reversed. This means that the coating is particularly thick in the middle of the filter and is soft on one side of the filter but very hard on the other side.
You can use the F:X Pro Reverse GND8 for these motifs:
- Sunrise and sunset
- Beach motifs
- Subjects with a horizon where there is a lot of brightness in the middle
GNDs are used (unlike normal ND filters) for subjects where the brightness conditions have a certain progression and therefore require different exposures for an evenly exposed image. The ideal place to use a Reverse GND would be, for example, a picture in which the sun can be seen and where clear lines dominate the picture.
We offer our Reverse GND 8 in the Size 100 x 150 millimeters (100 mm rectangular filter system) at. It has a density of 0.9 and 3 stops in the middle, darkened area. A stop means that the amount of light hitting the sensor decreases by one f-stop.
Exemplary color fidelity with extremely fine coating
Our GND square wave filter we have with the one we developed F:X Pro Coating which ensures that your images are always razor-sharp, even with extremely high-resolution cameras of 150 megapixels. It also lies Freedom of reflection ours F:X Pro Filter at 99.5 percent. With these filters you get exemplary color fidelity and reproduce your motif true to life..
In order to be able to offer you products that you can enjoy for a long time, our filters are made of Gorilla* Glasss. Thanks to a special manufacturing process, it is legendarily resistant and at the same time guarantees extremely high light transmission and color neutrality. Our anti-scratch layer gives the filter glass the final hardness against mechanical influences and ensures that dirt caused by grease, water or mud can be removed quickly and effortlessly.
But not only scratch resistant are our filters but alsoh temperature resistant. We tested this under the highest quality standards in scorching heat and also bitter cold. In short: They are the best filters we have ever built.
*Note: Gorilla®-Glas is a protected word mark of the Corning company and is used by us for our filters. All naming rights belong to the Corning company..
Technical data
Type of filter: |
100mm rectangular filter system |
Product line: |
F:X Pro rectangular filter |
Optical density:
|
0.9
|
F-stop reduction:
|
3 stops |
Transmittance: |
12.5% |
Material:
|
Gorilla* Glasss
|
Dimensions:
|
100x150mm
|
Weight: |
72g
|
scope of delivery
- 1x F:X Pro Reverse GND8
- 1x filter case
- 1x cleaning cloth
- 1x filter manual